The SC205 is a SilverCone two-way system with a 5" woofer. With an extended bass frequency response and an astounding output level, it will easily fill your room with exceptional sound.

The nearfield monitor also comes with the convenience of threaded screw inserts on the bottom and the back. That way, you can mount your SC205 on a regular microphone or speaker stand, or use the back plate for different wall mounting options.

The SC205 uses our 5" SilverCone woofer for an extended bass response. This very stiff diaphragm is honeycomb structured and glass fibre coated. Like in other models, such as the smaller SC204, the SC205 is driven by a sophisticated low distortion copper cap magnet system that uses a 1" voice coil responsible for delivering a greater linear excursion. All in all, this produces a bigger dynamic range than you would naturally assume from a speaker of these proportions. The result is an unsurpassed audio transparency that, when coupled with our proprietary AMT tweeter and PWM amplifier, will surprise you with a very powerful and precise low end.

Peter Lagoda converted his stereo setup completely to a Dolby Atmos system.

The Air Motion Transformer

Our AMT (Air Motion Transformer) tweeter is our own proprietary technology that follows the rule of not using "off-the-shelf" components when looking for the best possible results. The preciseness and detail in the high frequency, along with the general tightness of the bass and mid-range frequencies, will make the SC205 equally adequate for use on the road or in studio.

The Air Motion Transformer

Our tweeters base on the ribbon tweeter technology. We reinvented our own version of the A.M.T. which our speakers are well known for.  

Technical Specs

All facts and figures in detail

Dimensions

175x275x233

Width x Hight x Depth in mm

Frequency range

53 Hz - 21 kHz

-3 dB at 1 m distance

Sound pressure level

111 dB

Max. SPL per pair

Output power

100 W

Output power per speaker
Woofer size

5"

Diameter
Cross-over frequency

3000 Hz

Cross-over between drivers

General

Tweeter: AMT RS1

Output power tweeter: 50 W

Woofer: 5"

Output power woofer: 50 W

Protection limiter: Yes

Weight: 5 kg (11 lb)

Settings

Volume: - ∞ to + 6 dB

High-shelf filter (-5 dB to +3 dB): > 3 kHz

Desk filter cut (-5 dB to 0 dB): 160 Hz

Desk filter boost (0 dB to +3 dB): 80 Hz

Low-shelf filter (-5 dB to +3 dB): < 300 Hz

Adjustable LED brightness: Yes

Level-lock dip switch: Yes

Filter-lock dip switch: Yes

Connectors (10k impedance)

RCA in

XLR in

Power consumption

Standby: < 1 W

Maximum: 70 VA

Free-field frequency response (1/6 oct.)

Red = 0° / Green = 30° horizontal off-axis

Distortion

Orange = 2nd / Green = 3rd vs frequency response (red)

Polar Pattern (1m)

Red = 200Hz / Green = 1kHz / Blue = 5kHz