For large recording and mastering studios, film and television post-production facilities, cinema applications and in-wall installations, nothing beats our main monitors SC3010 and SC3012.

The SC3012 system features a very powerful amplifier array, with one amplifier per driver. All drivers, and especially our proprietary AMT RS6 tweeter, are developed to deliver high sound pressure levels, extremely low distortion and an optimized directivity. Together with the ultra-stiff plywood front plate and a special inner construction to lower resonances, they offer a smooth directivity, highly defined mids, pristine high frequencies and a powerful and tight low end.

The SC3012 systems are also built with in-wall installations in mind. In this case, simply adjust the filter controls to "in-wall". A set of high-density foam is provided to close the backfiring bass ports.

The silver module housing the midrange driver and our AMT RS6 tweeter can be rotated by 90 degrees allowing you to set up the speakers either horizontally or vertically.

The SC3012 is a high-resolution speaker, which sits at the crossroads of power and precision. This monitor is perfectly at home in any serious recording or mastering studio.

One sophisticated 12" double coated low resonance metal diaphragm woofer covers a frequency range to a low 25 Hz (-3 dB). Its long excursion driver will easily reproduce the lowest frequencies with an extraordinarily low harmonic distortion level.

The SC3012 also features a specially developed 5" midrange unit. Its glass fibre layered Rohacel™ sandwich diaphragm is responsible for clear and detailed midrange frequency reproduction. Both the 12" SilverCone woofer and 5" SilverCone midrange are equipped with our very low distortion copper cap magnet system.

The Air Motion Transformer (AMT) RS6 is exclusive to SC3012 and its smaller brother SC3010 and completes the system. The RS6 was developed to allow the SC3010/SC3012 to couple a faithful high frequency reproduction along with a clear and detailed high mid-range. This new AMT is 2.5 times bigger than the RS1, RS2 and RS3 Air Motion Transformer units, and it is a crucial part of the system as it helps to couple the middle and high frequencies with great precision. The crossover frequency goes down to 1800 Hz, ensuring a smooth directivity, and a very well defined mid to high-range response.

Jordi Büchel is a mastering engineer who runs his own studio near Cologne, Germany.

Full power with no compromise

Each driver is powered by its own custom specified PWM amplifier. Tweeter and midrange are supported with a 250 W amplifier each while the bass woofer is amplified with a bridged 800 W PWM module. All drivers are protected with a limiter detection circuit. With a maximum output level of 118 dB (SPL @ 1 m) you'll easily be able to judge your mixes precisely, whatever their intended output level is.

Simply put, the SC3012 is the perfect match of robustness and accuracy, where the whole becomes more than the sum of the parts. The SC3012 represents the pinnacle of EVE Audio engineering, our flagship model, and with good reason. This is the monitor you have been looking for.

As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience.

 

The Air Motion Transformer

Our tweeters base on the ribbon tweeter technology. We reinvented our own version of the A.M.T. which our speakers are well known for.  

Technical Specs

All facts and figures in detail

Dimensions

435x650x490

Width x Hight x Depth in mm

Frequency range

25 Hz - 21 kHz

-3 dB at 1 m distance

Sound pressure level

130 dB

Max. SPL per pair

Output power

1300 W

Output power per speaker

Woofer size

12"

Diameter

Cross-over frequency

220 & 1800 Hz

Cross-over between drivers

General

Tweeter: AMT RS6

Output power tweeter: 250 W

Mid-driver: 5"

Output power mid-driver: 250 W

Woofer: 12"

Output power woofer: 800 W

Protection limiter: Yes

Weight: 44 kg (97 lb)

Settings

Volume: - ∞ to + 6 dB

High-shelf filter (-5 dB to +3 dB): > 3 kHz

Mid EQ (-3 dB to +3 dB): 1 kHz

Desk filter cut (-5 dB to 0 dB): 160 Hz

Desk filter boost (0 dB to +3 dB): 80 Hz

Low-shelf filter (-5 dB to +3 dB): < 300 Hz

Adjustable LED brightness: Yes

Level-lock dip switch: Yes

Filter-lock dip switch: Yes

Input level dip switch: +7 dBu / +22 dBu

Connectors (10k impedance)

RCA in

XLR in

Power consumption

Standby: < 1 W

Maximum: 1000 VA

Free-field frequency response (1/6 oct.)

Top = Vertical configuration / Bottom = Horizontal configuration / Red = 0° / Green = 30° horizontal off-axis

Distortion

Orange = 2nd / Green = 3rd vs frequency response (red)

Polar Pattern (1m)

Top = Vertical configuration / Bottom = Horizontal configuration / Red = 200Hz / Green = 1kHz / Blue = 5kHz