Blackstar Amplification

Blackstar DEPT 10 AMPED 2 100Watt Guitar Amplifier Pedal

Name: Blackstar DEPT 10 AMPED 2 100Watt Guitar Amplifier Pedal
Brand: Blackstar Amplification
SKU: DEPT 10 AMPED 2
Price: 52040.0 INR
Availability: InStock

Blackstar DEPT 10 AMPED 2 100Watt Guitar Amplifier Pedal

Rs. 52,040.00

~~Rs. 55,040.00~~ Rs. 52,040.00

Sale Sold out

Tax included.

Product variants

Quantity

DEPT. 10 AMPED 2

The 100W Amp + FX Pedal.

100-watt Floorboard Amplifier with 3 Preamp Voices, 3 Power Amp Responses, Stompbox-style Effects (Drive, Modulation, Delay, and Reverb), FX Loop, MIDI Control, Cab Rig Speaker Simulation, and 4-in/2-out USB-C Audio Interface

AMPED 2 is a 100 Watt pedal power amplifier with drive pedals in the front end, and an advanced effects processor, capable of delivering the tone and feel of traditional valve amps. You can use it in the front end of a traditional amp, power a cabinet at 100 Watts or go direct, ensuring you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity means it’s equally at home in the studio or the stage.

100w Performance ready amp with multi effects.
Unique high-headroom design that automatically matches
to the speaker impedance to deliver maximum power and
optimum tone with any 8 or 16Ohm cabinet set-up.
Response control delivers three distinctly different and
authentic power valve responses – EL34, 6L6 and EL84.
Each setting delivers the response, dynamics, sag and
break-up characteristics of the selected valve power amp.
Choose from USA, UK and Classic Amp voicings to dial in
your perfect tone.
3 drive voices – Boost, Drive and Fuzz.
Effects include Modulation, Delay and Reverb.
Pro connectivity and integration into your setup using
low latency USB audio as an interface for recording, TRS
stereo line out and XLR Mono D.I. for live use.
Effects loop, 2x 9V DC outputs and MIDI control for easy
integration into your pedalboard or rig.
On board Chromatic Tuner allowing for tuning on the fly
during live performances.

100W Amp + FX in a Compact Pedal

AMPED 2 is a 100 Watt pedal power amplifier with drive pedals in the front end, and an advanced effects processor, capable of delivering the tone and feel of traditional valve amps. You can use it in the front end of a traditional amp, power a cabinet at 100 Watts or go direct, ensuring you can take your sound with you anywhere. Power reduction down to 1W and USB-C connectivity means it’s equally at home in the studio or the stage.

High Headroom Power Amp Design

The power amplifier’s unique, high-headroom design does not compromise on output even at 16 Ohms. Get maximum power and optimum tone with any cabinet set-up at 8 or 16 Ohms. Blackstar’s patented Response control offers distinctly different and authentic power valve responses and guitar amp dynamics.

Speaker Simulator and Direct Outputs

Fine-tune your cabinet, mic, and room simulations with our CabRig technology and output via XLR or stereo jack. Alternatively, connect via USB for effortlessly simple recording to your DAW without the need for an interface.

Advanced Effects Processor

Four studio quality, fully configurable, built-in effects pedals (Drive, Modulation, Delay and Reverb) provides unparalleled versatility.

Reverb, Delay and Modulation With Freeze/Emphasis Effect

The Reverb type, time and level can be customised on the front panel of the amplifier. The Reverb tone can be customised using Blackstar’s Architect deep-editing software and saved to the Dept. 10 AMPED 2 in place of the default reverb. When the Reverb is active, holding the Reverb footswitch will activate the ‘Freeze’ effect.

The Delay type, time, feedback and level can be customised on the front panel of the amplifier. The Delay pedal can be placed pre or post the Amplifier section using Blackstar’s Architect deep-editing software. The Delay trails can also be turned on or off using Blackstar’s Architect software. When the Delay pedal is active, holding the Delay footswitch will activate the ‘Freeze’ effect.

The Modulation type, time, depth and level can be customised on the front panel of the amplifier. When the Modulation pedal is active, holding the Modulation footswitch will activate an ‘Emphasis’ effect. The current settings of the selected Modulation type will be emphasised, with the result being a more intense effect.

View full details